Granite , Marble , Quartz  Wholesale & Fabrication 


Our 5 step Process from start to finish 

Showroom-Selecting Material 
Step 1






       






We have over 500 colors of Granite & Quartz available at our showroom. You are welcome to come in and choose the color that best suits you. Please bring rough sketch of countertop with the measurements & any small objects like a cabinet door/drawer, paint chips, flooring, tiles, or any other essential features of your room to help with your selection or a nice picture of your cabinet, floor and wall color which will help you to select the granite. Our sales staff will guide you pick the most suitable granite for your job. 

                                                                                   Template-Step 2











     


Once an order has been placed, a template will be scheduled for Templet person to visit the site and take exact measurements for fabrication. At this time, final seam placement should be discussed as well as any modifications to cabinetry, flooring, or walls that might prevent the granite from being installed properly. It is mandatory that all customer supplied sinks be available at the time of template.


       The paper template included with the sink, or the sink itself will need to be brought to the fabrication facility in order to ensure the accuracy of the cut-outs. Depending on the layout and complexity of the job the template can range from simple dimensions to a hard template of the current countertop or cabinets to ensure accuracy before cutting.


We recommend for exotic slabs or slabs with veins and movements to come and lay the templet on the slab so you can ensure how each countertop will look on your kitchen before cutting .                      

                                                                        Layout /Cutting the stone -Step 3

       














The template that was made by the installer is then passed off to the production team to be laid out on the slab(s) for fabrication. A bridge saw using diamond-tipped blades precisely cuts the granite to the specifications of the template. 

                                                                          Fabrication -Step 4

     







 






Once all cutting is complete, the countertops will move through production receiving sink cut-outs and metal rods for support, along with edge detailing and polishing. Once fabrication is complete, the countertops should be measured again to account for accuracy before being handed off to a crew for installation.



                                                                         Installation  -Step 5 















Drop-in and vessel sinks, cook-tops, outlets, and faucet/cord holes are all drilled on-site at the time of installation.                         Install time can vary significantly depending on the size and dynamics of the job. On average, vanity and bar tops can be completed in as little as 1 hour, with a standard kitchen install lasting 3-4 hours. If there is tear-out, on site cut-outs, or a more complex layout, installs can last longer than 4 hours.


     











All appliances and faucets must be on-site at the time of install. Seams are filled with an adhesive bonding agent and left to set, and they are color-matched to the stone in order to minimize their appearance. Dishwasher brackets will be used to secure them to the cabinetry/stone. Undermount sinks are secured using an epoxy and clamping method in order to the let the chemicals set prior to the installer leaving. Sinks do require a full 24 hours to set properly before reconnection.














Finally, the granite will be cleaned and sealed purchased Sealer before the installer leaves the site.  After finishing, the installer will do a walk through and answer any questions that you may have. Approving the installation paperwork confirms that you are satisfied with the work.

 

QUality